Here you can download various permits to work (PTW's) in Microsoft Word editable format. you don't need any conversation software f to convert your pdf format to Word just by clicking on the link given at the end of the each post. To download health and safety documents, reports, risk assessments, JSA's, method statements, procedures, policies and PowerPoints training and informative slides, keep on visit frequently and also share in your social media circles:

1. Download Files
2. PTW-Excavation Clearance
3. PTW-Cold Work
4. PTW-Electrical System
5. PTW-Excavation _ Risk Assessment
6. PTW-Hot Work
7. PTW-Radiography Permit
8. PTW-Scaffolding
9. PTW-Work at Heights
10. Excavation-Entry Checklist

Download Files

PTW-Excavation Clearance

PTW-Cold Work

PTW-Electrical System

PTW-Excavation _ Risk Assessment

PTW-Hot Work

PTW-Radiography Permit

PTW-Scaffolding

PTW-Work at Heights

Excavation-Entry Checklist

To prepare checklist for the Water Tanker inspection, following are some main points:

1. The physical condition of vehicles is good and free from leakage.
2. No damage to the tire (Bolts, crack, cuts & air pressure, etc.).
3. The side mirror should be a good condition.
4. Head & tail light and indicators are in working condition.
5. The wiper should be in running condition.
6. Windshield/glass should be in proper condition.
7. A seatbelt should be available.
8. Red triangle/Reflective tape should be used in front of the vehicle.
9. Registration number should be written.
10. Front & reverse horn.
11. Fire extinguisher in operator cabin.
12. Operators have a valid and suitable license.
13. The first aid kit should be available.
14. Normal break & emergency (hand) break should bein functional & operational condition.

Download File
Water Tanker Inspection Checklist

To prepare checklist for the Fire Extinguisher inspection, following are some main points:

1. Fire extinguisher always keeps on the trolley, it will be easy for the movements.
2. Keep Sand bucket.
3. The sand bucket should be covered to avoid mixing or foreign material.
4. A fire extinguisher should be kept at waist level height for quick access.
5. The fire extinguisher should be free from defects and regularly tested.
6. The inspection date and due date should be dearly marked.
7. The hose and hose connection is in good condition.
8. Check pres. sure gauge at regular intervals for any pressure drop.

Download File
Fire Extinguisher Inspection Checklist 

To prepare a checklist for the Excavator inspection, the following are some main points:

1. Engine and rotating parts should be properly covered.
2. The Track frame should be in good working condition.
3. Crawler belts and shoes should be in good condition.
4. The boom and arm should be free from defects like corrosion, bend, etc.
5. The hydraulic cylinder and hoses should be in good condition.
6. Bucket, and cutter pins should be free from defects, damage, corrosion, bends, etc.
7. Teeth should be free from defects, damage, corrosion, bends, etc.
8. The side mirror should be in good condition.
9. Head & tall light and indicators are in working condition.
10. The windshield/glass should be in proper condition.
11. The wiper should be in running condition.
12. The swing horn should be in good condition.
13. Fire extinguisher in operator cabin.
14. Operators have suitable license/experience certificates.

Download File
Excavator Inspection Checklist 

To prepare a checklist for the Steel Bar Cutting Machine inspection checklist, the following are some main points:

1. The physical condition of the body should be good & sound.
2. The junction box or motor should be fully packed.
3. The rotating part of the machine should be covered by a fixed guard.
4. The operating lever should be insulated with non-conductive material.
5. The bar guard should be fixed with the machine.
6. The machine should be grounded as per OSHA/required standards and requirements.
7. The power cable should be free from damage and connections have been taken through the industrial plug.
8. The machine should be operated by a competent person.

Download File
Steel Bar Cutting Machine Inspection Checklist

To prepare a checklist for the Portable Grinder inspection checklist, the following are some main points:

1. The grinding machine should be in good working condition.
2. The power cable should be free from damage and the connection have taken through an Industrial plug.
3. A flexible cord should be provided to keep the cable free from damage.
4. Motor capacity should be marked in RPM.
5. The deadman switch should be in working condition.
6. The handle should be provided for better control.
7. The wheel guard should be properly installed with the machine, so that gap between the guard and the wheel should not be more than 3 mm.
8. The grinding/cutting wheel should be free from defects and the rotating capacity should be marked.
9. The grinding machine should be double insulated and otherwise grounded.
10. Always use the designated key for removing and changing the wheel
11. The machine is operated by a competent person.
12. The RPM of the wheel should be more than the RPM of the motor.

Download File
Portable Grinder Inspection Checklist

To prepare a checklist for the Drill Machine inspection checklist, the following are some main points:

1. The drill machine should be in good working condition.
2. The power cable should be free from damage and the connection have taken through an industrial Plug.
3. A flexible cord should be provided to keep the cable free from damage.
4. The dead man switch should be in work condition.
5. The handle should be provided for better control.
6. The drill bit should be in good condition and free from defects.
7. Always use the designated key for removing and changing the drill bit.
8. The drill machine should be double insulated and otherwise grounded.
9. The machine is operated by a competent person.

Download File

Drill Machine Inspection Checklist

To prepare checklist for the Tools & Tackles inspection, following are some main points:

1. Use a thimble for making I-shape.
2. Wire rope should be knotted with the proper clamp.
3. Web-sling should be free from defects, e.g., cuts, abrasion, knot, hole & oily, etc.
4. l-shape should be free from damages.
5. D-shackle should be in good condition and its face should not expand more than 15% than its original shape.
6. Suitable I bolt should be used.
7. lifting tools & tackles should be used having suitable strength& capacity.
8. Lifting tools & tackles should safely be handle and store.

Download File
Inspection Checklist for Lifting Tools & Tackles

To prepare checklist for the Transit Mixer inspection, following are some main points:

1. The transit mixer should be physically in good condition.
2. No damage in the tire (Bolts, crack, cut & air pressure, etc.
3. The registration number should be written.
4. Head & tall light and Judicators are in working condition.
5. The side mirror should be in good condition.
6. Winds shield/glass should be in prop01condl1on.
7. The wiper should be in running condition.
8. Red triangle/reflective tape should be fixed in front of the vehicle.
9. The rotatory part of the secondary engine should be covered with fix guard.
10. The rotating part of the gearbox should be covered by a mixed guard.
11. Inbuilt adder should be proper with a suitable guard.
12. Front & reverse horn.
13. Fire extinguisher in the operator cabin
14. Operators have a valid and suitable license.
15. A First-Aid kit should be available.
16. Normal bleak & emergency (hand) brake should be in functional & Operational condition.

Download File
Transit Mixer Inspection Checklist  

To prepare checklist for the Gas Cutting Cylinders Set inspection, following are some main points:

1. The cylinder should be kept in a trolley.
2. Always kept in the upright position.
3. Properly y secured.
4. Valve protection cap.
5. The regulator should be free from any defect.
6. The pressure gauge should be in proper condition.
7. Provide flashback arrestor.
8. Provide industrial clip.
9. Hose condition should be good with colour coded.
10. The joint should be firm and free from defect, e.g., oily, rust & leakage. etc.
11. The touch should be in good condition.
12. Use proper PPEs for the Job, e.g., leather and gloves & safety goggles, etc.
13. Keep a fire extinguisher at working place.
14. Provide booth, made by fire retardant material (If required).
15. Work carried out by a competent person.

Download File
Gas Cutting Cylinders Set Inspection Checklist